Til innholdet

Sun storms causing corrosion

Telluric current causing corrosion on buried pipelines

Learn more

Levels of cathodic protection

Cathodic protection involves polarisation of a metal towards more reducing potentials

Learn more

Inspection of ICCP for building foundations

Frequent site surveys important to maintain adequate protection

Learn more

Pipeline integrity inspection

Assessment of corrosion protection for buried pipelines

Learn more

Antifouling anodes in strainers

Antifouling anodes in the mud box lids to prevent fouling.

Learn more

Dual-action antifouling & anticorrosion anodes

Cu anodes in pair with Al or Fe anodes to prevent fouling.

Learn more

MasterCath® remote access system

MasterCath® is designed for remote operation of ICCP and MGPS/ICAF antifouling.

Learn more

Building foundation protection

Cathodic protection can ensure that steel structures maintain its strength.

Learn more

Electrolytic antifouling explained

Low concentration of copper ions prevent marine growth.

Learn more

Marine fouling in seawater inlets

Marine fouling is an unwanted development of biological organisms.

Learn more

Design lifetime of sacrificial anodes

The amount of anodes corresponds with the surface to be protected.

Learn more

Aluminium vs. zinc anodes

Which to use; aluminium or zinc anodes in salt water environments?

Learn more

Al or Zn anodes in ballast and cargo tanks?

Aluminium anodes have both technical and economical advantages over zinc.

Learn more

Forms of corrosion

Here is explained 10 common types of corrosion, including galvanic corrosion and flow-assisted corrosion

Learn more

CathSense® ICCP in rough conditions

Operation in extreme conditions make considerably demands on the ICCP system.

Learn more

What is corrosion?

Corrosion is a process of degradation of metals and non-metals

Learn more

Galvanic series

Galvanic series determines the electro potential and nobility of metals and metal alloys.

Learn more

Cathodic protection explained

Principles of cathodic protection. How to stop corrosion

Learn more

Dynamic copper dosing

Tuning the antifouling dosing according to the water flow saves cost and is more environmental friendly.

Learn more

Range of corrosion protection

What sea cable length can be protected with only one cathodic protection system?

Learn more

SPS of mobile offshore units

Mobile offshore units (rigs) are highly valuable assets, which require well designed and operated systems for cathodic protection.

Learn more

Current leakage measurement

Effective measurement technique to detect undesirable connections.

Learn more

Lack of isolation leads to stray current

Unwanted interconnections may lead to corrosion and reduce the control of cathodic protection.

Learn more

ICCP or sacrificial anodes for buried tanks?

Cathodic protection systems with benefits and disadvantages.

Learn more

How to test isolation joints?

Different measurements techniques can be used to verify the condition of isolation joints.

Learn more

ICCP or sacrificial anodes?

Sacrificial anodes vs. ICCP for corrosion protection of harbour structrures.

Learn more

Avoiding corrosion in box cooler sea chest

Proper box cooler arrangement and protection reduce the risk of severe corrosion.

Learn more

Why grounding the rudder?

Lack of electrical/metallic connection between the rudder and the hull may result in spark corrosion.

Learn more

Nothing concerns more than the c-word

Out of sight, out of mind should not be an expression for buried pipelines.

Learn more

Buried steel pipeline protection

The answer is found in a 200 years old technique.

Learn more

Cathodic protection – vital for oil and gas pipelines

Corrosion prevention is an essential part of asset-protection strategy.

Learn more

Make sure your tank is not an anode

Accessories and connections can result in increasing risk of corrosion.

Learn more

Reliable system follow-up

Well-structured system follow-up ensures effective maintenance of ICCP and MGPS/ICAF systems.

Learn more
Certifications